This tray cutting machine is a hydraulic cutting machine, it is controlled by PLC(programmable logic controller), with touching screen, double side working table, increase the working efficiency twice or triple.
This cutting machine usually for die cut egg tray, disposable food tray, fresh food tray and so on.
Product name: tray cutting machine
Cutting area: 810×1400mm
Cutting foce: 50 to 300 Tons
1. Double cylinder, double-link precision four-column automatic balance mechanism, to ensure the cutting depth accuracy of each cutting position +-0.1mm.
2. All the sliding connection parts of the machine adopt the central oil supply automatic lubrication device without any careless oiling to cause damage to the parts, so as to minimize the wear and ensure the cutting speed and cutting accuracy of the machine.
3. When the cutting head presses down, it automatically slows down before touching the knife, and pressurizes it in two stages. When the upper working plate is pressed down to the cutting knife, it turns to be flexible and cuts. When the multilayer material is cut, there is no dimensional error between the uppermost layer and the lowermost layer.
4. Unique setting structure, with fine-tuning protection device, flexible adjustment of cutting height and cutting force, can extend the service life of die cutter and cutting offset. Unique mold setting structure, with cutter and cutting height. Make stroke adjustment simple and accurate.
5. Imported hydraulic system and Taiwan, Japan electrical equipment, power saving, low noise, simple operation, efficient work efficiency.
6. The surface of the machine is electrostatically sprayed at high temperature, and traditional manual painting is not used.
4. Tray cutting machine - Machine picture: