The machine can be used for die-cut foam sponges, shoes, suitcases, seat covers, masks, plastics, soft toys, artificial flowers, cardboard, plywood, EPE /, EVA, blister and grinding tools. It is basically suitable for all non-metallic materials, irregular shape cutting.
The machine's main shaft is supplied with an automatic lubrication system to extend the life of the machine. Hand-operated settings are safe and reliable. This machine has a large cutting platen for cutting large materials and is versatile. The depth of the cutting power is set to be simple and accurate, and easy to operate. The return stroke height of this machine platen can be arbitrarily set to reduce the idle stroke.
cloth cutting machine
Input power source
Area of cutting
610*1600mm or 610*1220mm or custom
30Tons,40Tons,50Tons or custom
1. When the machine is in use, it must be placed on a stable and solid shelf. The four corners of the chassis must be fixed by steel pipe, and the tower body is fixed with steel pipe diagonal support.
2. When the cloth machine is in use, it is strictly forbidden to add any length of the pump tube to the ash outlet of the front hose.
3, the balance weight box of the cloth machine is not allowed to be lifted separately from the cloth machine in principle, but it is considered that the individual tower cranes cannot be lifted as a whole. When it is necessary to separate, it must be fastened with the cable wind rope, and the rotating pump tube is fixed, so as to be hooked. This is also the case when the hook is removed, and the signal commander must command the side station during lifting.
4. When the cloth machine is not in use, the chassis must be stabilized with a 4m long-handed springboard. It is strictly forbidden to be placed directly on the soft land. It is strictly forbidden to separate from the fuselage and be firmly pulled by the cable.