Most of the reasons why the cutting machine often crushes the die are the following three points:
the problem: set the waste debris under the guide block to accumulate too much, leading to the pressure switch when the pressure plate is not exposed to the stroke switch, thereby crushing the die;
Solution: clean up debris;
Precautions: Regularly clean up the debris next to the machine;
the problem: the trip switch failure can not transmit signals.
Solution: Replace the new travel switch.
the problem: cutting machine oil circuit failure;
Solution: Please contact the professional for repair, do not disassemble and check by yourself.
If you want to knowledge about hydraulic cutting machine,please click:
Next: No Information