In the use of hydraulic cutting machine, due to various wear, corrosion, fatigue, deformation, aging and other phenomena, the precision will decrease, the performance will be reduced, and the quality of the product will be affected. If the situation is serious, the equipment will be shut down. Cutting machine repair is a technical activity taken by maintaining and repairing the machine, reducing its degradation, extending its service life, and maintaining or restoring the functions specified by the machine. The operation contents of the hydraulic cutting machine include inspection, adjustment, lubrication of the equipment, and timely detection and reporting of abnormal phenomena. In order to ensure the normal operation of the machine, reduce wear, protect accuracy and extend service life, it must be properly lubricated, maintained and maintained.
Hydraulic cutting machine maintenance and maintenance requirements:
The daily maintenance of the hydraulic cutting machine is the responsibility of the operator. The operator must be familiar with the structure of the equipment and follow the operating and maintenance procedures.
1. Before the start of work (shift or interrupt work), check the main part of the machine and add lubricant.
2. The equipment should be used strictly according to the equipment operation rules in the class. Pay attention to the operation status of the equipment and find out the problems in time for processing or reporting.
3. Before the end of each shift, clean the work and apply lubricating oil to each friction surface and bright surface.
4. The machine is thoroughly cleaned and inspected every two weeks under normal two-shift work.
5. If the machine is to be used for a long time, wipe all the shiny surfaces and apply anti-rust oil, cover the whole machine with a plastic cover.
6. Do not use unsuitable tools and unreasonable tapping methods when disassembling the machine.
7. The hydraulic oil should be changed regularly (once a year) to check whether the filter is clogged and broken, and whether the components of each cylinder have oil seepage.
