During the operation of the cutting machine, the temperature will rise continuously, but if the temperature reaches a certain temperature, it will affect the machine and may affect its normal use. At this time, we need to stop the machine, and It is necessary to wait for the oil temperature to cool before continuing to use, which will greatly delay the production output.
Therefore, Honggang cutting machine is constantly researching on cooling. The common method is to control the temperature of hydraulic oil. Because the continuous extrusion of hydraulic oil will inevitably bring about the whole temperature increase, the control oil temperature can also reduce the oil temperature. Consumption, in the case of relatively high temperatures, the oil is very volatile, so controlling the oil temperature is the basic and most critical method.
So, what should we do? The first is the adjustment of pressure. If the pressure applied to the hydraulic oil is very high, the hydraulic oil will heat up very quickly because of compression. Therefore, the most basic thing we need to control the oil temperature is The adjustment of the hydraulic pressure makes it within a reasonable range. Secondly, the control of the speed, the principle of frictional heat generation, we all know that with this principle, we can reduce the temperature by reducing the speed of the machine.
