The characteristics and precautions of the gantry cutting machine:
1. The gantry type cutting machine uses flywheel energy storage to save energy.
2. It adopts double-acting cylinder and differential circuit, which is flexible and simple to operate, and has a fast stroke speed.
3. The punch can be moved left and right, and the operation line is excellent.
4. The floating position on the platen is arbitrarily set to reduce unnecessary idle travel.
5. The frame is welded by steel plate, with high strength and no deformation and durability.
6. Low noise and improved working environment in the workshop.
In addition, in order to ensure safety, it is strictly forbidden to extend the hand and other parts of the body into the punching area during operation. The power must be turned off before maintenance and the wooden block or other hard objects should be placed in the blanking area to prevent the pressure plate after the pressure is released. Loss of control, causing accidental personal injury.
In special cases, when the upper pressure plate needs to be lifted up immediately, press the reset button. When stopping, press the power brake button (red button), and the whole system will stop working immediately.
