I believe that many factories are confused when buying new equipment. What kind of cutting machine should I buy? What kind of cutting machine is affordable? Can the bought cutting machine be used? How big a cutting machine should I buy? Waiting for a series of cumbersome questions, today Honggang Cutting Machine Co., Ltd. teaches you what is the type of cutting machine and cutting machine.
The characteristic of Honggang hydraulic cutting machine is: when the punching head acts on the workpiece through the die, the pressure in the working cylinder does not reach the rated pressure, and the pressure will increase with the time of contact (cutting into the workpiece). Until the electromagnetic reversing valve receives the signal, the reversing valve is reversed, and the punching head begins to reset; at this time, the pressure in the cylinder may not reach the set rated pressure value because of the time limit of the pressure oil entering the cylinder; That is to say, the system pressure has not reached the design value, and the die cutting has been completed.
The difference between the mechanical transmission cutting machine and the Honggang hydraulic transmission cutting machine is mainly determined by the different characteristics of the two transmissions: the mechanical transmission is a rigid transmission, and the hydraulic transmission does have a certain flexibility.
For mechanically driven cutting machines, the cutting speed is generally high, about 250 times/min; the cutting speed is variable, and the uniform cutting speed is: 200 mm/sec. The cutting speed of Honggang hydraulic cutting machine is generally: greater than 75 mm / sec.
Honggang Hydraulic Transmission Cutting Machine:
According to the use of processed parts:
A, four-column precision cutting machine: double cylinder, four-column automatic balance link structure.
B. Flat-type cutting machine: It differs from the gantry type cutting machine in that the beam is directly punched and there is no punching head that can be moved. The flat cutting machine is further divided into two categories: the beam is fixed or the beam can be moved back and forth and the table slide can be moved back and forth.
C. Gantry cutting machine: The punching part is a punching head that can move left and right along the beam. The die can be fixed on the punching head or placed on the workpiece. A large, computer-controlled gantry cutting machine punch is equipped with a rotatable die holder, which can be selected according to the program layout and select the corresponding tool; of course, an automatic feeding mechanism is required.
D. Rocker arm cutting machine: the punching part is a rocking arm that can swing, suitable for punching of natural materials.
According to the structure:
A. Computer controlled ultrasonic cutting machine: The control form is similar to the water beam cutting machine, and the punching source is an ultrasonic generator.
B. Computer-controlled water beam cutting machine: It is a modern cutting machine that improves the predecessors. It does not need to use a die and cuts according to the input procedure. The punching source is a high pressure water beam generator.
C. Fully automatic rolling type cutting machine: processing the whole leather or textile with the sandwich method.
D, hydraulic transmission cutting machine: is a modern more common cutting machine.
Hydraulic cutting machines are indispensable equipment for some light industry. Traditionally, the cutting machine is a machine that presses the material by means of the force of the machine motion to cut the material. Modern cutting machines have undergone some changes, and high-pressure water jets, ultrasonics and other advanced technology have been used in leather punching technology, but these devices are still classified in the cutting machine.