Q: What are the precautions for starting the leather embossing machine?
answer:
1. This unit must be equipped with a good ground terminal (connected to the correct ground)
2. The machine is extremely sensitive to moisture and dust and needs to be placed in a suitable working space.
3. The vacuum tube of the machine will generate high heat, so it should not be placed next to the machine that will generate high heat, nor can it be installed in the place where the solar energy is directly irradiated. For the above reasons, it will affect the heat dissipation function of the vacuum tube.
4. If the machine is shut down for more than one hour, and then turn on the machine, wait 10-15 minutes for the vacuum tube to warm up and protect the service life of the vacuum tube.
5. The upper and lower extremes of the machine (upper and lower molds) cannot be directly touched together, and there must be insulation and work pieces between them.
6. During operation, when outputting high frequency, remember not to touch the upper output end (ie, the upper mold), nor can you use the universal meter, test meter or other low frequency and low voltage instruments to try to directly measure the upper pole output. Causing an accident
7. Regularly check the insulation of the lower (lower mold). If there is damage, burnt or breakdown, you need to replace the insulation immediately. Otherwise, if you continue working, sparks will occur and the process cannot be completed.
8. If sparks occur frequently (when the upper and lower molds are touched together, high-cycle output) without checking the repair, the machine parts will be damaged and the work will be affected.
9. The work used to make the finished product should be free of moisture and dust, because the above objects are easy to cause sparks.
10. After the machine is turned on, you will hear the sound of the fan turning (4KW, 5KW sound is small), which is used for heat dissipation of the vacuum tube. If the fan is faulty, it must be repaired immediately, otherwise the vacuum tube will be damaged.
