Honggang automatic feeding cutting machine die model installation adjustment:
1) In the oil pump start and stop interface, press the “manual operation” button to enter the manual operation screen.
2) Press the “Activate Activation” button to activate this screen. Otherwise, the function operation buttons in this interface are invalid. (activate hand
After the operation interface is operated, the external button of the machine is invalid.
3) Place the die to be installed on the pull plate, press the pull button to advance the die to feed the die into the cutting zone.
4) Adjust the height of the cutting plate by pressing the “Pushing plate jog up” or “Pressing plate jog down” on the panel to make the cutting
The pressure plate is close to the die. Then use the clamp or the mounting screw to fix the die on the cutting platen.
5) After the installation is completed, press the “Operation Release” button to release the activation status of this screen.
6) Press “Home” to return to the pump start and stop interface.
